Product ID:EXFLUX 1005 FLUX REMOVER
MSDS Date:06/03/1992
FSC:3439
NIIN:00N078567
MSDS Number: CGGJY

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-2799
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Preparer: KERRY YARBER

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

SODIUM BISULFATE; (SODIUM HYDROGEN SULFATE)

CAS: 7681-38-1

RTECS: VZ1860000

OSHA PEL N/K

ACGIH TLV: N/K

CORN STARCH; (STARCH)

CAS: 9005-25-8

RTECS: GM5090000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3

THE POSITION OF WELDER'S HEAD W/RESPECT TO FUME

RTECS: 9999999ZZ

(SUCH AS CHLORINATED HYDROCARBON VAPS FROM CLEANSING

RTECS: 9999999ZZ

FUME & GAS DECOMP PRODS GENERATED ARE DIFFERENT IN

RTECS: 9999999ZZ

NORM OPERATION INCL THOSE ORIGINATING FROM

RTECS: 9999999ZZ

THOSE FROM BASE METAL & COATING, ETC, AS NOTED.

RTECS: 9999999ZZ

FLUORIDES, COMPLEX OXIDES OF IRON, MANGANESE,

RTECS: 9999999ZZ

LISTED IN INGREDS. GASEOUS RXN RPODS MY INCL CO &

RTECS: 9999999ZZ

FROM ARC. ONE REC WAY TO DETERM COMPOSITION & QTY OF

RTECS: 9999999ZZ

TAKE AIR SAMPLE INSIDE WELDER'S HELMET IF WORN/IN

RTECS: 9999999ZZ

"AMERICAN WELDING SOCIETY," P.O. BOX 351040, MIAMI,

RTECS: 9999999ZZ

CONTAMINANTS IN WELDING ENVIR-A SAMPLING STATEGY

RTECS: 9999999ZZ

WORKER TO KEEP EXPOSURE BELOW RECOMMENDED EXPOSURE

RTECS: 9999999ZZ

START W/SHADE WHICH IS TOO DARK TO SEE WELD ZONE.

RTECS: 9999999ZZ

VIEW OF WELD ZONE. PROVIDE SCREENS AND FLASH

RTECS: 9999999ZZ

WELL AS DARK SUBSTANTIAL CLOTHING.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:FUMES AND GASES MAY BE INHALED.
SKIN/EYE CONT MAY OCCUR W/FLUXES & CHEM AIDS. ELEC ARC WELDING MAY
CREATE 1/MORE OF FOLLOWING HLTH HAZS. FUMES & GASES CAN BE
DANGEROUS TO HLTH. CERTAIN MED STUDI ES HAVE SUGGESTED THAT LUNG
DMG CAN RSLT FROM EXPOS TO WELDING FUMES & GASES. ARC RAYS CAN
INJURE EYES (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:& BURN SKIN. ELEC SHOCK CAN KILL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:REMOVE TO WELL VENTILATED AREA. CALL FOR MEDICAL AID. EMPLOY
FIRST AID TECHNIQUES RECOMMENDED BY AMERICAN RED CROSS. INGEST:CALL
MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GI
VE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH W/POTABLE WATER FOR
MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD . SKIN:FLUSH
W/COPIOUS AMOUNTS OF WATER. CALL MD .

Flash Point:NONFLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS & BRAZING FLAMES CAN
IGNITE COMBUSTIBLES AND FLAMMABLES. REFER TO ANSI Z49.1 FOR FIRE
PREVENTION DURING USE OF WELDING & ALLIED PROCEDURES.

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS &
PRECAUTIONARY LBL ON PROD.
Other Precautions:(SEE AMERICAN NATIONAL STD Z49.1 "SFTY IN WELDING &
CUTTING" PUBLISHED BY AMERICAN WELDING SOCIETY, P.O. BOX 35040,
MIAMI, FL 33136 & OSHA PUBLICATION 2206 (29CFR1910), U.S. GOVT
PRINTING OFFICE, WASH , D.C.20402 FOR MORE DETAIL).

Respiratory Protection:USE NIOSH APPRVD RESPIRABLE FUME RESPIRATOR/AIR
SUPPLIED RESP WHEN WORKING IN CONFINED SPACE/WHERE LOCAL EXHAUST OR
VENT DOES NOT KEEP EXPOSURE BELOW THE RECOMMENDED EXPOSURE LIMIT.
Ventilation:USE ENOUGH GEN VENT & LOC EXHAUST @ ARC/BOTH, TO KEEP FUMES
& GASES FROM WORKER'S BRTHG ZONE & GEN AREA. TRAIN (ING 14)
Protective Gloves:WELDER'S GLOVES.
Eye Protection:HELMET/FCSHLD W/FILTER LENS. (ING 15)
Other Protective Equipment:PROT WHICH HELPS PVNT INJURY FROM RADIA, SPK
& ELEC SHOCK. MAY INCL ARM PROT, APRON, HATS, SHOULDER PROT, AS
(ING 17)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:WELDED, PROCESS, PROCEDURES, & ELECTRODES USED. OTHER
CNDTNS WHICH ALSO INFLUENCE COMPOSITION & QTY OF FUMES & GASES TO
WHICH WORKERS MAY BE EXPOSED INCL:COATINGS ON METAL BEING WELDED
(SUCH AS PAINT, PLATING/GALVANIZING), NUMBER OF WELDERS & VOL OF
WORK AREA, THE QUALITY & AMT OF VENT, (ING 3)

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WEDLING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY OF BOTH ARE DEPENDENT UPON
METAL BEING (SUPDAT)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIR. DISCARD ANY PROD, RESIDUE, DISPOSABLE CNTNR/LINER IN
ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE WITH FEDERAL,
STATE, AND LOCAL REGULATION S.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.